Smartalock Hardware Installation
The attached provides a simple 1 page operation overview of Smartalock system from end user IT perspective, along with the mandatory and optional requiremen...
Sun, 13 Oct, 2019 at 4:23 PM
The attached 1 page A3 documents provides a simple guide for cabling up the Smartalock system components. Note the v2 System is used in solutions sold after...
Thu, 14 Jun, 2018 at 10:32 AM
The attached provides detailed steps to physically mount and attach the Smartalock v2, and SmartalockL2 Lock and Latch to locker carcass and doors. If mount...
Tue, 6 Apr, 2021 at 10:41 AM
Recommended position for cable channel and pre-drilled screw holes for Smartalock Original
Fri, 11 Dec, 2020 at 4:54 PM
Below is a poster explaining the process to follow in order to replace a broken lock on the smartalock locker system. The following link is to a video also ...
Mon, 16 Jul, 2018 at 10:07 AM
A guide walking through the steps in which to map a locker bank on its initial setup.
Fri, 13 Jul, 2018 at 4:02 PM
Recommend panel routing for flush kiosk and card reader. Note: For kiosk mounted on doors, cap screws are prefered over standard wood screws. For thi...
Wed, 2 Dec, 2020 at 9:32 AM
Pre-drilled hole channel position for Smartalock Lite
Fri, 11 Dec, 2020 at 5:03 PM
SmartalockLite and SmartalockL2 systems require a different configuration of controller and accompanying components than the v1 or v2 Smartalock systems. ...
Tue, 28 Apr, 2020 at 4:07 PM
Pre-drilled hole patterens for smartalock L2
Fri, 26 Nov, 2021 at 11:51 AM