Technical Drawings
2D Drawings of Smartalock and associated components
Attached is 2D drawing of Smartalock Original Locker hardware sold from March 2017 to present.
Fri, 11 Dec, 2020 at 3:25 PM
2D technical drawing of Smartalock Kiosk showing Kiosk dimensions
Wed, 2 Dec, 2020 at 12:12 PM
2D Technical drawing of Smartalock Floating Latch. Sold from March 2020 to present
Thu, 10 Dec, 2020 at 1:08 PM
The attached technical drawings are for an example 2.1m x 3.9m x 0.5m melteca locker bank with 30 doors (third height, 10 wide), side mounted kiosk/card r...
Thu, 1 Sep, 2016 at 5:09 PM
The attached technical drawings are for an example 3.2m x 2.1 x 0.5m melteca locker bank with 32 doors (quarter height, 8 modules wide), front mounted ki...
Wed, 23 Nov, 2016 at 3:29 PM
The attached drawing shows the technical dimensions of the Smartalock Slave Controller and SubSlave mini Controller
Fri, 11 Dec, 2020 at 4:45 PM
Drawing of Aluminum Extrusion used in locker wall/slab to hide cabling between each locker.
Tue, 19 Sep, 2017 at 9:49 AM
Recommended position for cable channel and pre-drilled screw holes for Smartalock Original.
Fri, 11 Dec, 2020 at 3:17 PM
Recommend panel routing for flush kiosk and card reader. Note: For kiosk mounted on doors, cap screws are prefered over standard wood screws. For this ...
Fri, 11 Dec, 2020 at 3:19 PM