Technical Drawings

2D Drawings of Smartalock and associated components

Lock Drawing v1 and v2
Attached is 2D drawing of Smartalock Locker hardware. Smartalock v2 Locks are for systems sold from March 2017. The Wire cover is used only on the v2 ...
Thu, 10 May, 2018 at 10:36 AM
Kiosk Drawing
2D technical drawing of Smartalock Kiosk showing Kiosk dimensions
Fri, 12 Jun, 2020 at 4:07 PM
Latch Drawings
2D Technical drawing of latch body. v1 and v2
Wed, 27 Mar, 2019 at 3:11 PM
Sample Drawings for 30 Locker Bank
The attached technical drawings are for an example 2.1m x 3.9m x 0.5m melteca locker bank with 30 doors (third height, 10 wide), side mounted kiosk/card r...
Thu, 1 Sep, 2016 at 5:09 PM
Sample Drawings for Quarter height doors - 32 unit locker bank
The attached technical drawings are for an example 3.2m x 2.1 x 0.5m melteca locker bank with 32 doors (quarter height, 8 modules wide), front mounted ki...
Wed, 23 Nov, 2016 at 3:29 PM
Controller v2 Drawing
The attached drawing shows the technical dimensions of the Smartalock v2 Controller (sold from March 2017)
Mon, 3 Apr, 2017 at 5:18 PM
Smartalock Extrusion Drawing
Drawing of Aluminum Extrusion used in locker wall/slab to hide cabling between each locker.
Tue, 19 Sep, 2017 at 9:49 AM
Installation - Lock and cable channel position
Reccomended position for cable channel and pre-drilled screw holes for smartalock v2
Thu, 10 May, 2018 at 10:22 AM
Flush Kiosk Installation - End Panel/Door Routing
Recommend panel routing for flush kiosk and card reader.  Note: For kiosk mounted on doors, cap screws are prefered over standard wood screws. For this ...
Thu, 25 Oct, 2018 at 3:44 PM
Smartalock Lite - Lock drawing
Technical drawing of Smartalock Lite
Wed, 27 Mar, 2019 at 3:10 PM